PRINTED MATERIALS:
5. Printed Product Overview Guide (this document)
IMPORTANT: Product set up and activation
instructions are online: www.lacrossealerts.com
6. IMPORTANT: Activation Key Card is required for
set up & activation of every device. Do not throw away.
PRODUCT OVERVIEW GUIDE
WIRELESS REMOTE TEMPERATURE/HUMIDITY MONITOR
(With or Without Optional Temperature Probe)
ADDITIONAL EQUIPMENT (NOT INCLUDED)
• Two fresh AAA, IEC LR03, 1.5V Alkaline batteries
• Two-sided tape as needed
IMPORTANT
• Browser with high speed Internet
• Network router
This document provides general product information and
complete set up and activation instructions.
FEATURES AND MEASUREMENTS (Diagram 1)
you have an account, choose model TX60U-IT on the website
to begin the set up process with step-by-step instructions.
Enter the key from the ACTIVATION KEY CARD (included in
the package) when prompted by the website.
(A)
This socket is ONLY
for the external probe.
DO NOT insert
power plug into it.
LCD
Button
Need help? Visit:
GENERAL USE AND APPLICATIONS
**Optional external
temp. probe included
in select packages.
(B)
Use your smartphone, tablet or computer to remotely monitor
ambient temperature and humidity levels that affect your home
second home, office or rental property.* The 6 foot detachable
dry probe measures temperature of air outside through a
window, or even in your refrigerator or freezer.* Text & e-mail
alerts can signify power outages to help you protect property or
(A) Wireless Ambient Temperature & Humidity Monitor:
•
•
•
LCD displays ambient air temp. & humidity (CH1)
LCD displays probe temperature (CH2)
Transmits collected data to Internet Gateway
within a 200 Ft. wireless range.
•
Weather resistant case (not water proof)
Note: The case with LCD cannot get wet and
MONITORING OPTIONS
•
•
•
•
•
•
•
•
•
•
Home, second home, office or rental property
Indoor or outdoor temperature and humidity
Basement, garage, attic and utility room
Refrigerators, freezers and dry food storage
Plants, gardens and greenhouses
Outdoor pets, farms and livestock
Books, photos and musical instruments
Computers, servers and electronics
Wine storage and humidors
may be affected by high humidity conditions.
Wall hanging or free standing
•
(B) **Optional Temp. Probe on 6 Ft. Detachable Cable:
•
•
•
Wet & Dry temperature probes are sold separately.
Check your retailer for availability. Attach a probe at
any time with no need to reset sensor.
**Attach a dry temperature probe to the main sensor
case to monitor DRY environments such as air or dry
**Or attach a Wet probe for measuring wet or humid
conditions such as a pool, aquarium or terrarium:
Fireplace mantel
PACKAGE CONTENTS
**Optional external temp.
probe included in select
packages.
(1)
(3)
(2)
HOW IT WORKS
•
•
The wireless sensor transmits temp. & humidity data to the
Internet Gateway (200 Ft. [60.96m] wireless range).*
The Internet Gateway connects to your existing network
router and uses your high-speed Internet connection to
upload collected measurements to your own account at
HARDWARE:
1. Wireless Ambient Temperature and Humidity
Monitor with mounting bracket (TX60U-IT)
3. Internet Gateway with mounting bracket,
AC adapter and LAN cable
•
•
Once the sensor and gateway are activated on your
account, you can monitor sensor(s) online from a
smartphone, tablet or computer, and set up custom
e-mail/text alerts*.
Internet gateway to monitor additional areas.
4. Mounting hardware (screws and drywall anchors)
LOW BATTERY INDICATOR
La Crosse Technology, Ltd will repair or replace this product,
at our option and at no charge as stipulated herein, with new or
reconditioned parts or products if found to be defective during
the limited warranty period specified above. All replaced parts
and products become the property of La Crosse Technology,
Ltd and must be returned to La Crosse Technology, Ltd.
Replacement parts and products assume the remaining
original warranty, or ninety (90) days, whichever is longer. La
Crosse Technology, Ltd will pay all expenses for labor and
materials for all repairs covered by this warranty. If necessary
repairs are not covered by this warranty, or if a product is
examined which is not in need or repair, you will be charged for
the repairs or examination. The owner must pay any shipping
charges incurred in getting your La Crosse Technology, Ltd
product to a La Crosse Technology, Ltd authorized service
center. La Crosse Technology, Ltd will pay ground return
shipping charges to the owner of the product to a USA address
only.
• Low battery icon appears on LCD when batteries are low.
• You will receive an e-mail or mobile text message alert when
the battery power of the sensor is low. Change the batteries
immediately.
Note: The LED light turns ON briefly after changing batteries.
The LED light turns OFF when not needed to save battery
power. The previously stored information in the temperature
and humidity sensor will not be affected or cancelled while you
change the batteries.
MAINTENANCE AND CARE
• Avoid extreme temperatures, vibration and shock.
• Clean the sensor with a soft, damp cloth. Do not use
solvents or scouring agents.
• Do not submerge the sensor case in water.
• Do not kink the 6 ft. sensor cable.
• Secure the 6 ft. cable to avoid tripping hazards.
• Immediately remove all low powered batteries to avoid
leakage and damage.
• Opening the casings invalidates the warranty. Do not try to
repair the unit. Contact La Crosse Technology® for repairs:
Your La Crosse Technology, Ltd warranty covers all defects in
material and workmanship with the following specified
exceptions: (1) damage caused by accident, unreasonable use
or neglect (including the lack of reasonable and necessary
maintenance); (2) damage occurring during shipment (claims
must be presented to the carrier); (3) damage to, or
deterioration of, any accessory or decorative surface; (4)
damage resulting from failure to follow instructions contained in
your owner’s manual; (5) damage resulting from the
SPECIFICATIONS
performance of repairs or alterations by someone other than
an authorized La Crosse Technology, Ltd authorized service
center; (6) units used for other than home use (7) applications
and uses that this product was not intended or (8) the products
inability to receive a signal due to any source of interference..
This warranty covers only actual defects within the product
itself, and does not cover the cost of installation or removal
from a fixed installation, normal set-up or adjustments, claims
based on misrepresentation by the seller or performance
variations resulting from installation-related circumstances.
Temperature range:
-40°F to 140°F with 0.2°F resolution
“OFL” displayed if outside this range.
Humidity measuring range: 3% to 99%
Transmission range:
200 feet (60.96 m) in open space
*Optional Temp. Probe:
Channel 2:-40°F to 140°F with 0.2°F
resolution “OFL” displayed if outside
this range, and displayed “nC” if probe
is not connected.
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME
LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE,
OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE
OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS
PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES
OR FOR PUBLIC INFORMATION. THIS PRODUCT IS NOT A
TOY. KEEP OUT OF CHILDREN’S REACH.
Sensor battery power
Internet gateway power:
Battery life cycle:
2 x AAA Alkaline, IEC LR03, 1.5V
AC adapter (included)
Approximately 24 months
TX60U-IT size:
5.23" H x 0.76" W x 1.44" D
LA CROSSE ALERTS PRODUCT LINE
This warranty gives you specific legal rights. You may also
have other rights specific to your State. Some States do not
allow the exclusion of consequential or incidental damages
therefore the above exclusion of limitation may not apply to
you. For warranty work, technical support, or information,
please contact:
See the entire product line including temp./humidity monitors,
water leak detectors and remote weather stations at:
WARRANTY INFORMATION
La Crosse Technology, Ltd
2817 Losey Blvd. S.
La Crosse, WI 54601
La Crosse Technology, Ltd provides a 1-year limited warranty
on this product against manufacturing defects in materials and
workmanship. This limited warranty begins on the original date
of purchase, is valid only on products purchased and used in
North America and only to the original purchaser of this
product. To receive warranty service, the purchaser must
contact La Crosse Technology, Ltd for problem determination
and service procedures. Warranty service can only be
performed by a La Crosse Technology, Ltd authorized service
center. The original dated bill of sale must be presented upon
request as proof of purchase to La Crosse Technology, Ltd or
La Crosse Technology, Ltd’s authorized service center.
Lost your Activation Key Card?
Contact Customer Support:
Phone: (608) 785-7920
DISCLAIMERS
* Disclaimers: La Crosse Technology, LTD. (“La Crosse”)
provides various alert and monitoring services to aid users. (1)
Service providers may charge users for alert services.
Standard messaging and data rates apply and will be billed to
the customer’s wireless account. Customers may be unable to
receive text messaging or data service in some areas due to
unavailability of service. (2) La Crosse shall not be liable for
accuracy, usefulness or availability of data transmitted via the
service. Users are solely responsible for damages to persons
or property by service use.
All rights reserved. This handbook must not be reproduced in
any form, even in excerpts, or duplicated or processed using
electronic, mechanical or chemical procedures without written
permission of the publisher.
This handbook may contain mistakes and printing errors. The
information in this handbook is regularly checked and
corrections made in the next issue.
We accept no liability for technical mistakes or printing errors,
or their consequences. All trademarks and patents are
acknowledged.
PROTECTED UNDER US PATENTS:
5,978,738 6,076,044 6,597,990
FCC STATEMENT
This device complies with part 15 of the FCC rules. Operation
is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received,
including interference that may cause undesired operation.
LT012714
|