Linear Satellite Radio DXT 61A User Manual

DXT-61A FEATURES  
DXT-61A  
PRESS BUTTON  
TO SEND SIGNAL  
BY  
PENDANT  
TRANSMITTER  
RED INDICATOR  
WILL LIGHT DURING  
OPERATION  
Operation  
Instruction  
FCC NOTE:  
This device complies with FCC  
Part 15. Operation is subject to  
the following two conditions:  
(1) This device may not cause  
harmful interference and (2)  
this device must accept any  
interference received, including  
interference that may cause  
undesired operation.  
PRESS BUTTON FOR A  
MINIMUM OF 2 SECONDS  
USA & Canada (800) 421-1587 & (800) 392-0123  
(760) 438-7000 - Toll Free FAX (800) 468-1340  
PRODUCT DESCRIPTION  
The DXT-61A is a battery powered, portable, miniature The DXT-61A transmitter is powered from a 12-Volt Type  
GP-23 battery with an expected battery life of about 1 year.  
The red test/operate indicator lights during operation. When  
the transmitter does not function, or its range decreases,  
replace the battery.  
pendant transmitter designed for use with Linear’s DX Format  
receivers. The transmitter can be used in a limitless number  
of wireless remote control applications. Pressing the button  
on the transmitter sends a digitally coded wireless signal to  
its companion receiver.  
The transmitter button has a positive “click” feel. The  
transmitter is supplied with an adjustable lanyard with a  
breakaway release.  
The digital DX code format features over a million possible  
codes. Each DX transmitter is precoded at the factory to a  
unique code, so no field coding is required. The transmitter  
can send a signal for up to 10 seconds with each button  
activation.  
DXT-61A OPERATION  
The DXT-61A is a one-button, one-code transmitter. Pressing  
the button sends the transmitter’s code to the receiver. Press  
the button for a minimum of two seconds to insure receiver  
activation.  
For versatility, the transmitter code can be programmed into  
any receiver channel. Receivers must be programmed to  
the transmitter code before system testing and operation.  
DX Format digital receivers are programmed by “Learning”  
the preset factory code from the transmitter. Refer to the  
receiver’s instructions for details on programming.  
DXT-61A  
LANYARD  
BREAKAWAY  
RELEASE  
LENGTH  
ADJUSTER  
BATTERY REPLACEMENT  
LINEAR LIMITED WARRANTY  
This Linear product is warranted against defects in material and workmanship for twelve (12) months.  
This warranty extends only to wholesale customers who buy direct from Linear or through  
Linear’s normal distribution channels. Linear does not warrant this product to consumers. Consumers  
should inquire from their selling dealer as to the nature of the dealer’s warranty, if any. There are  
no obligations or liabilities on the part of Linear LLC for consequential damages arising out  
of or in connection with use or performance of this product or other indirect damages with  
respect to loss of property, revenue, or profit, or cost of removal, installation, or reinstallation.  
All implied warranties, including implied warranties for merchantability and implied warranties for  
fitness, are valid only until the warranty expires. This Linear LLC Warranty is in lieu of all other  
warranties express or implied.  
TWIST LANYARD LOOPS TO  
REMOVE BATTERY COVER  
All products returned for warranty service require a Return Product Authorization Number (RPA#).  
Contact Linear Technical Services at 1-800-421-1587 for an RPA# and other important details.  
IMPORTANT !!!  
Linear radio controls provide a reliable communications link and fill an important need in portable  
wireless signaling. However, there are some limitations which must be observed.  
IMPORTANT!  
For U.S. installations only: The radios are required to comply with FCC Rules and Regulations  
as Part 15 devices. As such, they have limited transmitter power and therefore limited range.  
A receiver cannot respond to more than one transmitted signal at a time and may be blocked by  
radio signals that occur on or near their operating frequencies, regardless of code settings.  
Changes or modifications to the device may void FCC compliance.  
WHEN CHANGING THE  
BATTERY, INSERT  
THE NEGATIVE (-)  
END FIRST  
Infrequently used radio links should be tested regularly to protect against undetected  
interference or fault.  
A general knowledge of radio and its vagaries should be gained prior to acting as a wholesale  
distributor or dealer, and these facts should be communicated to the ultimate users.  
PUSH POSITIVE (+) END  
INTO TRANSMITTER LAST  
Copyright © 2012 Linear LLC  
215404 E  
 

Legacy Car Audio Car Stereo System LCD95MP3 User Manual
LG Electronics Air Conditioner BG 101A User Manual
Logitech Computer Keyboard 920 002836 User Manual
Lumiscope Blood Pressure Monitor 100 001 User Manual
Mackie Car Speaker MR5S User Manual
Magnepan Speaker Magneplanar CC3 User Manual
McIntosh Projector MDLP1 User Manual
Meade Telescope AT102ED User Manual
Metra Electronics Car Satellite Radio System 99 9103 User Manual
Midland Radio Two Way Radio ML3215 User Manual