LINK ELECTRONICS, INC.
SDI SMPTE COLOR BAR GENERATOR
WITH GEN-LOCK
MODEL 1199
FEATURES
ꢀ Gen-lock
ꢀ 10 Bit Processing
ꢀ SDI SMPTE Color Bars
ꢀ NTSC or PAL
ꢀ Two Black Burst Output
ꢀ Two SMPTE Color Bar Output
ꢀ RS-170A Spec
ꢀ H. Timing
ꢀ V. Timing
ꢀ Rotary Encoder
ꢀ RS-189A
ꢀ 7-Segment LED Readout
ꢀ Use As Stand-alone
The LINK 1199 is another family of modules for the An infinite Gen-lock timing range makes the 1199 ideal
DigiFlex 1000 series. The unit automatically selects for timing the signal into the studio facility. The two
between NTSC or PAL in the Gen-lock mode. The 1199 outputs of the 1199, color bar and black burst outputs
defaults to NTSC in the free run mode. For PAL are adjustable over the entire H and V infinite timing
operation, an external PAL black burst signal must be range. For total flexibility, the 1000 frame will hold up to
attached to the EXT REF input on the rear I/O. The1199 ten 1199 models, this makes timing of SDI color bar and
takes advantage of the latest FPGA technology to black an easy task. Each of the 1199’s in a frame may
provide the highest performance for a SMPTE color bar select either color bars or black burst. Each module may
generator. There are two outputs each of SDI SMPTE be used to time source video’s in a system, by using the
color bars and the two outputs each of SDI black. The black burst output.
timing range is infinite for each output set i.e. Black and
color bars.
The 1199 is ideal for use as either a master or slave
generator in any system, making Link Electronics the
There is a front card edge LED for displaying the only choice for a digital timing system to meet both your
function under adjustment. Two push-buttons switches needs and your budget.
are used for “Select” and “Enter”. The front card edge
LED displays H and V timing numbers for audit and The 1199 receives a reference black burst for timing
confirmation.
purposes in the Gen-lock mode, or as a stand-alone
without a reference input in the free-running mode. The
The 1199 SDI SMPTE Color Bar generator specifically unit will operate in the 7200 single module chassis for
designed for use in 601 SDI digital applications in both remote field operation. The 1000 frame holds up to ten
525/60 and 625/50 systems. A high stability VCXO modules with dual power supplies of any mix of the 1000
provides the necessary accuracy for the most series modules. At present there are 35 module choices
demanding requirements.
for system integration.
LINK ELECTRONICS, INC. ꢀ 2137 Rust Avenue ꢀCape Girardeau, MO 63703-7668
Phone 573 334 4433 ꢀ FAX 573 334 9255
|