ENGLISH
FRANÇAIS
ESPAÑOL
Network Audio Player
NA6005
Quick Start Guide
Guide de démarrage rapide
Guía de inicio rápido
Download the Marantz “Hi-Fi Remote” App Scan the QR
code to download and install the Marantz “Hi-Fi Remote”
App using your smartphone and a scanning app or manually
search the Apple App store or Google Play store for the
“Marantz Hi-Fi Remote”
Required for Basic connections
Speaker
systems
Amplifier
Speaker cables
Required for Network connections
or
LAN cable
Wi-Fi router
These drawings are for illustrative purposes only and may
not represent the actual product(s).
2
Important: External Antennas
The removable external antennas are required for both
Bluetooth and Wireless network connectivity. Please make
sure to connect the antennas before attempting to use the
Bluetooth or Wi-Fi features of the NA6005.
n Connecting the external antennas for
Bluetooth/Wireless connectivity
For each of the two antennas:
1) Place the antenna evenly over the antenna terminal
located at the upper left or right corner of the rear
panel.
2) Turn the antenna clockwise until it is fully connected.
Do not over tighten.
3) Rotate the antenna upwards for the best possible
reception.
q
w
e
3
Setup Steps
There are five steps to the setup process.
Installing batteries in the
remote control unit
1
Installing batteries in the remote control unit
1
Connect to the amplifier
2
Connect to the network
3
Enjoying your music!
4
Operate this unit with an iPad, iPhone or
Android smartphone
5
R03/AAA
batteries
4
Connect to the amplifier
2
This unit
Power cord
(supplied)
R
L
Connect to household power outlet
(AC 120 V, 60 Hz)
Audio cable
(supplied)
L
R
Power cord
Amplifier
5
Connect to the network
3
Wired LAN
When connecting cables (wired connection), connect a LAN
cable between your network audio player and your network
router.
Wireless LAN
When connecting to wireless LAN (Wi-Fi), follow the
instructions in “Connecting the external antennas for
Bluetooth/Wireless connectivity” and connect the antennas.
Modem
Internet
Modem
Internet
Router with
access point
To WAN side
To LAN port
To WAN side
Router
6
Choose from one of the following options
Make sure your iOS device
is connected to your WiFi
Network. Select the network
named “NA6005” from the
Settings/Wi-Fi screen on your
device.
3
3
3
3
Wireless
iOS device
iOS version 7
or later
Marantz NA6005
Make sure your iOS device is
iOS device +
USB cable
connected to your WiFi Network.
Connect your iOS device to the front
using your USB cable.
iOS version 5
or later
Power on
Select
language
1
2
Select “Wi-Fi - scan” and wait as
your NA6005 looks for available
networks.
No WPS router
Wi-Fi router
Press the WPS button on your
router.
WPS router
Wi-Fi router
7
Connect a network cable
between your NA6005 and
your router.
Power on
1
4
4
4
4
2
3
4
Wired
Select language
K
R
O
W
T
E
N
(cable not included)
Please wait while your NA6005
connects to your wired network.
Follow the instructions
and tap Next.
Please wait as completing the
connection can take a few minutes.
The front panel of the NA6005 will show the
status of the connection.
5
5
5
5
Marantz NA600
Press the iOS Button on the
back of your NA6005.
This message will appear
on your iOS device
Select “Allow”.
Share Wi-Fi Settings?
Connected!
Do you want to share your Wi-fi
settings so this accessory can
connect to the Wi-Fi network?
iOS
lgnore
Allow
Select your network name.
If your network name is not
listed, select “Rescan”.
Enter your network
password using the number
keys on the remote control.
Within 2 minutes, press
the WPS button on the
back of your NA6005.
Please wait as completing the
connection can take a few minutes.
The front panel of the NA6005 will show the
status of the connection.
WPS
8
Enjoying your music!
4
n Enjoying Internet Radio
n Enjoying music using Apple AirPlay
Open Control Center
1
1
Press INTERNET RADIO.
(iOS 7 and later) by
swiping up from the
bottom of your screen,
then tap AirPlay.
Select the item, then
press ENTER.
2
Repeat step
to select
3
Select the “Marantz
NA6005” from the
AirPlay Device list.
2
the station, then press
ENTER.
NA6005
Play the song on your iPhone, iPod
touch or iPad.
3
9
n Enjoying music using Bluetooth
Select “Marantz
NA6005” from the
Bluetooth device list on
your mobile device.
• Some devices may required
you to verify the numeric code
and press ENTER.
1
3
4
Press Bluetooth to select
Bluetooth.
When using for the first time,
the unit will go into the pairing
mode automatically and “Pairing
Mode” will appear on the display
of the unit.
Bluetooth
Marantz NA6005
[Pairing Mode]
Turn on Bluetooth f...
Play music using any
app on your device.
: cancel
Activate Bluetooth on
your mobile device.
2
Bluetooth ON
10
Operate this unit with an iPad, iPhone or Android smartphone
5
When this unit is connected to a Marantz amplifier or CD player, the amplifier or CD player can be operated using the Marantz
“Hi-Fi Remote” App.
Amplifier
This unit
Remote connector
cable (supplied)
Set to
Remote connector cable
“EXTERNAL”.
CD player
Set to
“EXTERNAL”.
11
Owner’s Manual
Please reference to the Owner's Manual for more details about the setup and operation of the network audio player and its
features.
n Online Version
n Printable Version
Enter the following URL into your web browser:
Access the print version of the owner's manual from the
included CD-ROM or select the “PDF Download” link
from the Online Version.
Insert the disc into
your PC.
1
Online Manual
Contents
English
WEB Manual
Overview
Connections
Playback
Settings
Tips
Follow the screen or double click on
the PDF file.
2
NNetAwo6rk0A0ud5io Player
Appendix
PDF
PDF Download
Network Audio Player
Copyright 2014 D&M Holdings Inc. All Rights Reserved.
c
12
D&M Holdings Inc.
Printed in China 5411 11252 00AM
|