W2
Arrayable two-way compact trapezoid system
features
Q
Q
Q
Q
Q
Q
Arrayable compact trapezoid enclosure
High SPL output capability
70º coverage angle
Multi-laminate birch plywood construction
Switchable active/passive operation
Certified MAN quick-connect flying option
applications
Q
Q
Q
Q
Q
Theatre sound systems
Club sound reinforcement
Underslung/infill for concert sound reinforcement
Music playback in nightclubs
On-stage instrument monitor
The qualities of the Wavefront W2 have established its success as a powerful stand-alone system. This switchable
active/passive two-way cabinet uses specialist high power drive units to achieve maximum SPL’s from a very
compact enclosure.
It combines smooth, dynamic full frequency performance with exceptional articulation for a portable stand-
alone system. Designed to meet the industry requirement for a 12" (300mm) driver plus horn configuration,
Martin Audio’s version is more refined for superior, professional results.
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: [email protected]
All information is Copyright © 2006 Martin Audio Ltd.
1 of 5
W2
Arrayable two-way compact trapezoid system
frequency responses
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: [email protected]
All information is Copyright © 2006 Martin Audio Ltd.
3 of 5
W2
Arrayable two-way compact trapezoid system
overall dimensions
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: [email protected]
All information is Copyright © 2006 Martin Audio Ltd.
4 of 5
W2
Arrayable two-way compact trapezoid system
technical specifications
architectural and engineering specifications
TYPE
Compact two-way trapezoid, switchable
active/passive
The loudspeaker system shall be of the two-way
switchable active/passive type consisting of one 12"
(300mm) direct radiating reflex loaded low frequency
transducer and one 1" (25mm) exit HF compression
driver mounted on a constant directivity horn in a
trapezoidal plywood enclosure. The enclosure shall be
fitted with an integral pole mounting socket and
threaded inserts for wall and ceiling mounting. Active or
passive operation shall be selected by a switch at the
rear of the enclosure. In active mode the loudspeaker
shall be bi-amped and operated with a separate
electronic controller. In passive mode, low and high
frequency sections shall be integrated by an internal
1.5kHz passive crossover network.
FREQUENCY RESPONSE (5) 60Hz-18kHz 3dB
-10dB @ 50Hz
DRIVERS
12" (300mm) / 3" (75mm) voice coil
1" (25mm) exit HF compression driver
LF/(LF + HF): 300W AES, 1200W peak
HF: 60W AES, 240W peak
RATED POWER (2)
RECOMMENDED AMPLIFIER 400-550W into 4 ohms
SENSITIVITY (6)
LF/(LF + HF): 98dB
HF: 106dB
122dB continuous, 128dB peak
LF/(LF + HF) 8 ohms
HF: 8 ohms
70º horizontal, 40º vertical
1.5kHz active/passive
Textured grey paint
Grey perforated steel
2 x Neutrik NL4
MAXIMUM SPL (7)
NOMINAL IMPEDANCE
DISPERSION (-6dB)
CROSSOVER
FINISH
PROTECTIVE GRILLE
CONNECTORS
FITTINGS
8 x M8
1 x mounting pole socket
2 x MAN blanking plates
2 x rear kelp fittings
(W) 365mm x (H) 554mm x (D) 364mm
(W) 14.4ins x (H) 21.8ins x (D) 14.3ins
24kg (53lbs)
Performance of the loudspeaker system with its
electronic controller shall meet or exceed the following
criteria:
Frequency response measured 1 metre on axis shall be
60Hz-18kHz 3dB.
DIMENSIONS
WEIGHT
High frequency dispersion at -6dB points shall be
70˚H x 40˚V.
Power handling shall be 300W AES, 1200W peak
(LF/HF), 60W AES, 240W peak HF
Rated impedance shall be 8 ohms LF/(LF+HF),
8 ohms HF.
accessories
HTKEM03A
HTKCT05
GPT060
Flying yoke
8mm Shouldered eye bolt
Fitted enclosure flying points
Lightweight install stud
HTKLIS
Maximum SPL measured at 1 metre on axis shall be
122dB continuous, 128dB peak.
Dimensions (W) 365mm x (H) 554mm x (D) 364mm
(14.4ins x 21.8ins x 14.3ins).
Weight 24kg (53lbs).
N o t e s
(1) Measured on-axis in half space at 2 metres, then referred to 1 metre.
(2) AES Standard ANSI S4.26-1984.
The loudspeaker system shall be the Martin Audio W2.
(3) Measured in half space at 2 metres with 1 watt input, using band limited pink noise, then referred to 1 metre.
(4) Measured in half space at 2 metres using band limited pink noise, then referred to 1 metre.
(5) Measured on-axis in open (4π) space at 2 metres, then referred to 1 metre.
(6) Measured in open (4π) space at 2 metres with 1 watt input, using band limited pink noise, then referred to 1 metre.
(7) Measured in open (4π) space at 2 metres using band limited pink noise, then referred to 1 metre.
Tr a d e D e s c r i p t i o n s A c t
Due to Martin Audio’s policy of continuing improvement, we reserve the right to alter these specifications without prior notice.
Martin Audio is committed to refining state of the art sound reinforcement, combining in-depth product and field applications
research with advanced manufacturing techniques. Every Martin Audio product is built to the highest manufacturing standards
and rigorously tested to ensure that it meets the performance criteria specified in the design.
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: [email protected]
All information is Copyright © 2006 Martin Audio Ltd.
5 of 5
|