VAPOUR
steam
iron
y
23140_IM.indd
1
2013/07/15 08:21:45 AM
DRY IRONING
CARE AND CLEANING
•The iron can be used on the dry setting with •Before cleaning the iron ensure it is unplugged
or without water in the water tank, it is best
to avoid having the water tank full while dry
ironing.
from the wall socket and that it has completely
cooled down.
•Do not use any abrasive cleaners.
•Turn the variable steam control to the mini-
mum position.
SELF-CLEANING
•Select the setting on the temperature control •Fill half of the water reservoir.
dial best suited for the fabric to be ironed.
CAUTION: If the iron has been used for a long
•Set the temperature control to its maximum
position.
period of time, it is hot and there is no water in •Insert the plug into the wall socket.
it, do not refill it with water until the iron cools •Allow the iron to heat up until the indicator
down.
light goes out.
•Unplug the steam iron.
BURST OF STEAM
•The burst of steam feature provides additional
steam for removing stubborn wrinkles.
•Holding the iron horizontally over the sink,
change the steam control to the maximum
position.
•Turn the temperature control to ”••” or “•••” •Boiling water and steam will be ejected from
position.
the holes in soleplate with impurities washed
•Turn the variable steam control to the maxi-
mum position
•Press the powerful steam button to release the
burst of steam.
out.
•Move the iron over an old piece of cloth. This
ensures that the soleplate is dry before stor-
ing.
NOTE: To prevent water leakage from the sole- STORAGE
plate, do not keep the powerful steam button in •Unplug the appliance from the wall socket,
for more than 5 seconds.
empty the water tank and the iron to cool
down completely.
After Ironing
•Set the temperature control dial to the mini-
mum position.
•To protect the soleplate, place the steam iron
in an upright position.
•Remove the plug from the wall socket.
23140_IM.indd
3
2013/07/15 08:21:45 AM
23140_IM.indd
4
2013/07/15 08:21:45 AM
|