Once you insert the installation CD, the installation should begin automatically.
Select installation options for the RF5700 devices and follow the on-screen
instructions.
Quick Start Guide
RF5700 KEYBOARD & MOUSE
Before beginning the installation of your new RF5700 Keyboard and Mouse,
please make sure that your computer is powered OFF.
If the installation does not begin automatically, you may need to do the
following:
CONNECTING YOUR NEW RF5700 KEYBOARD AND MOUSE
a) Click on the Start menu, then Click on the Run button.
b) Browse to the drive where the Installation CD is located.
c) Select the Autorun.exe file, then click on the Open button.
d)Click on OK to start the installation manually.
e) Select installation options for the RF5700 devices and follow the
onscreen instructions.
1) Remove the keyboard, mouse, and receiver from the box.
2) Make sure that all 3 pieces are on the same channel-either channel 1 or 2 (The
Channel Switch is on the bottom of each device. The mouse channel
switch is located inside the battery compartment). Either channel is okay to
use, but all 3 of the devices have to be on the same channel for proper
synchronization. (Fig 1, Fig 2, Fig 3, and Fig 4)
For more information on how to use the RF5700 Keyboard and Mouse, please
read the User's Guide. The User's Guide can be found on the included CD,
under the folder named “Rf5700”, in the keyboard-driver folder. You can also
find the User's guide and other supporting documents on the Memorex
Keyboard product listings for specific product manuals and guides.
Channel Switch
Mouse Battery Compartment
and Switch (Fig2)
If you need any additional help in connecting, synchronizing or installing the
RF5700, please feel free to contact Memorex's technical support.
www.memorex.com for our Frequently Asked Questions. Phone support is
available at (310) 891-1680 from the hours of 9:00am to 6:00pm, PST. M-F.
Keyboard Bottom (Fig 1)
Receiver Bottom (Fig 4)
Receiver Channel Selector (Fig 3)
3) Insert your supplied batteries into the keyboard and mouse according to the
diagrams on the devices. (Fig 1 and Fig 2) To ensure proper battery
installation, please refer to the battery direction layouts located in the battery
compartments of your keyboard and mouse.
4) Unplug your current keyboard connector from the computer.
5) Plug the purple PS/2 connector on the receiver into the keyboard port
on your computer. (Fig 5)
.
Keyboard Connector from Receiver (Purple)
(Fig 5)
© 2003 Memorex Products, Inc.
|