INSTALLATION INSTRUCTIONS FOR PART 88-00-3302
APPLICATIONS
1995-2001 General Motors
Full Size Trucks & SUV’s
88-00-3302
KIT FEATURES
• Kit Replacement Pocket
KIT COMPONENTS
A) Pocket
TOOLS REQUIRED:
Socket Wrench I Flat Blade Screwdriver
A
TABLE OF CONTENTS
Dash Disassembly: pg. 1 & pg. 2
Final Assembly: pg. 3
1-800-221-0932
© COPYRIGHT 2004 METRA ELECTRONICS CORPORATION
88-00-3302
Most vehicles with CD player/cassette
player in center console
Disconnect the negative battery
terminal to prevent an acciden-
tal short circuit.
1
A
Open door on pocket below CD play-
er and remove (2) 7mm screw.
(Figure A)
2
3
Unclip and remove entire trim panel
surrounding CD player/cassette
player and pocket door assembly.
(Figure A)
B
Depress the clips on each side of
the unit and slide straight out.
(Figure B)
4
2
88-00-3302
Reassemble in reverse order of disassembly
using the 88-00-3302 instead of the factory
CD player/cassette player.
1
3
|