Philips Portable CD Player AX5003 10 User Manual

AX5002  
AX5003  
AX5004  
Portable CD Player  
PROGRAM  
 
México  
Es necesario que lea cuidadosamente su instructivo de manejo.  
PRECAUCIÓN - ADVERTENCIA  
No abrir, riesgo de choque eléctrico  
ATENCIÓN  
Verifique que el voltaje de alimentación  
sea el requerido para su aparato  
Para evitar el riesgo de choque eléctrico, no quite la tapa.  
En caso de requerir servicio, dirijase al personal calificado.  
Descripción:  
Modelo:  
Tocadiscos de CD portatil  
AX 5002/01, /11, /16, AX 5003/01, /11, /16,  
AX 5004/01, /11, /16  
Alimentación:  
Consumo:  
110–127/220–240 V~ 50–60 Hz  
4 W (AY 3170)  
Importador:  
Domicilio:  
Philips Mexicana, S.A. de C.V.  
Norte 45, # 669, Col. Industrial Vallejo  
Localidad y Telefono: C.P. 02300 México D.F., Tel. 5728 4200  
Exportador:  
País de Origen:  
Philips Electronics Hong Kong, Ltd.  
China  
Nº de Serie:  
______________________________  
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO  
ANTES DE USAR SU APARATO.  
 
6
5
7
8
4
3
9
0
2
!
@
1
#
$
^
%
 
3
English  
Controls .................................................6 CD play..........................................12–13  
Quick start .............................................7 Features.........................................14–18  
Power supply...................................8–10 In-car connection.................................19  
General information......................10–11 Troubleshooting.............................20–21  
Français  
Commandes.........................................22 Lecture CD.....................................28–29  
Mise en service rapide........................23 Caractéristiques ............................30–34  
Alimentation électrique ................24–26 Raccordement en voiture ....................35  
Informations générales.................26–27 Pannes et remèdes .......................36–37  
Español  
Controles .............................................38 Reproducción de un CD.................44–45  
Encendido rápido.................................39 Características ..............................46–50  
Alimentación eléctrica..................40–42 Conexión al automóvil.........................51  
Información general......................42–43 Localización de averías.................52–53  
Controls ...............................................54 CD play..........................................60–61  
Quick start ...........................................55 Features.........................................62–66  
Power supply.................................56–58 In-car connection.................................67  
General information......................58–59 Troubleshooting.............................68–69  
Guarantees  
Philips product warranty for  
Australia......................................72–73  
Guarantee and service for  
Polizia de garantía  
Mexico.........................................70–71 New Zealand ....................................74  
 
5
CONTROLS, refer to the illustration on page 3  
QUICK START  
1 OPEN 2...........opens the CD lid  
1
OPEN  
2
2 2;...................switches the player on, starts or pauses CD play  
3 9 .....................stops CD play, clears a program or switches the player off  
4 §....................skips and searches CD tracks forwards  
5 ESP..................ELECTRONIC SKIP PROTECTION ensures continuous CD playback  
regardless of vibrations and shocks  
6 MODE..............selects the different playing possibilities: SHUFFLE,  
AA  
LR6  
UM3  
2.  
2.  
1.  
1.  
SHUFFLE REPEAT ALL, REPEAT, REPEAT ALL and SCAN  
7 ........................display  
3
CD  
4
5
HOLDOFF  
8 PROGRAM.......programs tracks and reviews the program  
9 BASS...............switches the bass enhancement on and off. This button also  
switches acoustic feedback (the beep) on/off when it is pressed for  
more than 2 seconds  
0 ....................skips and searches CD tracks backwards  
! RESUME..........stores the last position of a CD track played  
HOLD...............locks all buttons  
6
PLAY  
7
VOLUME  
OFF ..................switches RESUME and HOLD off  
@ LINE OUT/p....3.5 mm headphone socket, socket to connect the player to another  
audio input of an additional appliance, remote control socket (not  
on all versions)  
# VOL E.........adjusts the volume  
$ 4.5V DC ...........socket for external power supply  
% ........................typeplate  
!!!  
^ ........................belt clip holder  
Remote control (not on all versions)  
Use only the Philips AY 3767 cord remote control with your CD-player. The buttons  
on the remote control have the same functions as the corresponding buttons on  
the CD-player.  
1 If necessary, press 9 once or twice until the set is switched off,  
2 Firmly plug the remote control into the LINE OUT/p socket of the CD-player, and  
then connect the headphones to the socket of the remote control.  
This set complies with the radio interference requirements of the  
European Community.  
3 Turn the volume down with VOL F on the remote control and set VOL E on  
the CD-player to position 8.  
 
6
7
POWER SUPPLY  
POWER SUPPLY  
Batteries (supplied or optionally available)  
ECO-PLUS NiMH battery information (for versions supplied with  
the rechargeable ECO-PLUS NiMH battery AY 3362)  
You can use the following batteries with this CD-player:  
• normal batteries type LR6, UM3 or AA (preferably Philips), or  
• alkaline batteries type LR6, UM3 or AA (preferably Philips).  
Recharging works only on players supplied with the rechargeable ECO-PLUS NiMH  
battery AY 3362.  
Note: – Old and new or different types of batteries should not be used in  
combination. Remove batteries if they are empty or if the player is  
not going to be used for a long time.  
Recharging the ECO-PLUS NiMH battery on board  
1 Insert the rechargeable ECO-PLUS NiMH battery AY 3362.  
2 Connect the mains adapter to the 4.5V DC socket of  
the player and then to the wall socket.  
y A is shown and ChArGEis displayed for 5  
seconds.  
Inserting batteries  
1 Push OPEN 2 to open the CD lid.  
2 Open the battery compartment and insert either  
2 normal or alkaline batteries, or the rechargeable  
NiMH battery AY 3362 (if supplied).  
• Recharging stops after a maximum of 7 hours, or when you start playback.  
3 When the battery is fully recharged,  
and  
FULLappear briefly in the display, before the  
display switches off.  
Battery indication  
The approximate power level of your batteries is shown in the display.  
Notes: – It is normal for the batteries to become warm during recharging.  
– If the batteries become too warm, recharging will be interrupted for  
approximately 30 minutes and Hotis displayed.  
Battery full  
Battery two-thirds full  
Battery one-third full  
Battery dead or empty. When the batteries are  
dead or empty, the symbol A flashes, bAttis  
displayed, and the beep tone sounds repeatedly.  
– To ensure proper recharging on board, take care that contacts are clean.  
– Use only the ECO-PLUS NiMH battery AY 3362.  
Handling instructions  
• Recharging already charged or half-charged batteries will shorten their lifetime.  
We therefore recommend that you let the rechargeable ECO-PLUS NiMH battery  
run till it is completely empty before you recharge it.  
Average playing time of batteries under normal conditions  
Battery type  
ESP on  
7 hours  
22 hours  
10 hours  
ESP off  
6 hours  
19 hours  
9 hours  
Normal  
• To avoid a short circuit, do not let the battery touch any metal object.  
Alkaline  
• If the battery becomes empty soon after recharging, then either its contacts are  
dirty or it has reached the end of its lifetime.  
Rechargeable ECO-PLUS NiMH battery  
Batteries contain chemical substances, so they should be disposed  
of properly.  
 
8
9
POWER SUPPLY / GENERAL INFORMATION  
GENERAL INFORMATION  
Mains adapter (supplied or optionally available)  
CD-player and CD handling  
Use only the AY 3170 adapter (4.5 V/300 mA direct  
current, positive pole to the centre pin). Any other  
product may damage the player.  
• Do not touch the lens A of the CD-player.  
• Do not expose the set, batteries or CDs to humidity,  
rain, sand or excessive heat (caused by heating  
equipment or direct sunlight).  
V
DC  
1 Make sure that the adapter’s voltage corresponds to  
the local voltage.  
• You can clean the CD-player with a soft, slightly  
dampened, lint-free cloth. Do not use any cleaning  
agents as they may have a corrosive effect.  
2 Connect the adapter to the 4.5V DC socket of the  
player and to the wall socket.  
• To clean the CD, wipe it in a straight line from the centre towards the edge using a  
soft, lint-free cloth. A cleaning agent may damage the disc! Never write on a CD or  
attach a sticker to it.  
Note: Always disconnect the adapter when you are not using it.  
Belt Clip (not on all versions)  
1 To attach the belt clip to the CD-player, position the  
shaped grip (found on the back of the belt clip) so that  
it fits into the belt clip hole of the CD-player.  
• The lens may cloud over when the set is moved suddenly from cold to warm  
surroundings. Playing a CD is not possible then. Leave the CD-player in a warm  
environment until the moisture has evaporated.  
BELT CLIP  
• Active mobile phones in the vicinity of the CD-player may cause malfunctions.  
• Avoid dropping the set as this may cause damage.  
2 Turn the clip to LOCK as indicated on the set.  
3 To detach, gently lift the belt clip and turn  
to RELEASE as indicated on the set.  
Headphones HE 545  
• Connect the supplied headphones to the LINE OUT/p  
LOCK  
LIFT  
socket of the player.  
RELEASE  
Note: LINE OUT/p can also be used for connecting the  
player to your HiFi system (with a signal lead) or to  
your car radio (with a cassette adapter or signal  
lead). In both cases, the volume of the player must  
be set to position 8.  
Environmental information  
• All redundant packing material has been omitted. We have done our utmost to  
make the packaging easily separable into two mono materials: cardboard (box) and  
polyethylene (bags, protective foam sheet).  
Use your head when using headphones  
Hearing safety: Do not play your headphones at a high volume. Hearing experts  
advise that continuous use at high volume can permanently damage your hearing.  
• Your set consists of materials which can be recycled if disassembled by a  
specialized company. Please observe the local regulations regarding the disposal of  
packing materials, exhausted batteries and old equipment.  
Traffic safety: Do not use headphones while driving a vehicle. It may create a hazard  
and it is illegal in many countries. Even if your headphones are an open-air type  
designed to let you hear outside sounds, do not turn up the volume so high that you  
cannot hear what is going on around you.  
 
10  
11  
CD PLAY  
CD PLAY  
Playing a CD  
Playback information  
This CD-player can play all kinds of Audio Discs such  
as CD-Recordables and CD-Rewritables. Do not try to  
play a CD-ROM, CDi, VCD, DVD or computer CD.  
If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded properly,  
nF dISCis displayed, indicating that the CD has not been finalized. In that  
case, use FINALIZE on your CD recorder to complete the recording.  
When playing a CD-Rewritable (CD-RW), please note that it takes 3–15 seconds  
after pressing 2; for sound reproduction to start.  
1 Push the OPEN 2 slider to open the player.  
Playback will stop if you open the CD lid.  
2 Insert an audio CD, printed side up, by pressing the  
CD onto the hub.  
While the CD is read, 1-:-flashes in the display.  
3 Close the player by pressing the lid down.  
ESP  
Volume and bass  
4 Press 2; to switch the player on and start playback.  
y The current track number and elapsed playing  
time are displayed.  
Volume adjustment  
• Adjust the volume by using VOL E.  
• You can pause playback by pressing 2;.  
y The time at which playback was paused starts  
flashing.  
Bass adjustment  
You can choose between the bass enhancement levels  
dbb1and dbb2.  
• You can continue playback by pressing 2; again.  
1 Press BASS once for dbb1and twice  
for dbb2.  
5 Press 9 to stop playback.  
y The total number of tracks and the total playing  
time of the CD are displayed.  
y dbb1or dbb2is displayed and  
is shown.  
2 To switch dbb1or dbb2off, press BASS  
twice or once, respectively.  
6 Press 9 again to switch the player off.  
y
goes off.  
• To remove the CD, hold it by its edge and press the  
hub gently while lifting the CD.  
Note: If there is no activity, the set will automatically  
switch off after a while to save energy.  
 
12  
13  
FEATURES  
FEATURES  
Selecting a track and searching  
Programming track numbers  
Selecting a track during playback  
• Briefly press or § once or several times to skip to  
the current, previous or next track.  
You can store up to 30 tracks to play in a program.  
A single track may be stored more than once in the  
program.  
ESP  
y Playback continues with the selected track, and  
the track’s number is displayed.  
1 While playback is stopped, select a track with  
or §.  
Selecting a track when playback is stopped  
1 Briefly press or § once or several times to select  
the desired track. The track number is displayed.  
2 Press PROGRAM to store the track.  
y
PROGRAM lights up; the track number  
programmed and Pwith the total number of  
stored tracks are displayed.  
2 Press 2; to start CD play.  
y Playback starts with the selected track.  
3 Select and store all desired tracks in this way.  
Searching for a passage during playback  
1 Keep or § pressed to find a particular passage in  
a backward or forward direction.  
4 Press 2; to start playback of your selected tracks.  
y
PROGRAM is shown and playback starts.  
y Searching starts while playback continues at low  
volume. After 2 seconds the search speeds up.  
• You can review the program by pressing PROGRAM for more than 2 seconds.  
2 Release the button when you reach the desired passage.  
y The display shows all the stored tracks in sequence.  
y Playback continues from this position.  
Notes: – If you press PROGRAM and there is no track selected,  
SELECtis displayed.  
Notes: – If the player is in SCAN mode (see MODE chapter), searching is not possible.  
– In SHUFFLE, SHUFFLE REPEAT ALL or REPEAT mode (see MODE chapter), or  
while playing a program, searching is only possible within the particular  
track.  
– If you try to store more than 30 tracks, FULLis displayed.  
Clearing the program  
• While playback is stopped, press 9 to clear .  
program  
y CLEAris displayed once, PROGRAM goes off,  
and the program is cleared.  
Note: The program will also be cleared if the power supply is interrupted, or if the  
CD-player lid is opened, or if the set switches off automatically.  
 
14  
15  
FEATURES  
FEATURES  
Selecting different playing possibilities – MODE  
RESUME and HOLD  
It is possible to play tracks in random order, to repeat a single track or the entire CD,  
and to play the first few seconds of each track.  
You can interrupt playback and continue (even after an  
extended period of time) from the position where  
playback stopped (RESUME) and you can lock all buttons  
of the set so that no action will be executed (HOLD). Use  
the RESUME–HOLD–OFF slider for these functions.  
1 Press MODE during playback as often as required in  
order to activate one of the following ‘modes’. The  
active mode is shown in the display.  
y
SHUFFLE: All tracks of the CD are played in  
random order until all of them have been played  
once.  
ESP  
RESUME – continuing from where you have stopped  
1 Switch the slider to RESUME during playback to activate RESUME.  
RESUME is shown.  
y
y
SHUFFLE REPEAT ALL: All tracks of the CD are  
played repeatedly in random order.  
REPEAT: The current track is played repeatedly.  
REPEAT ALL: The entire CD is played repeatedly.  
2 Press 9 whenever you want to stop playback.  
y
y
3 Press 2; whenever you want to resume playback.  
y SCAN: The first 10 seconds of each of the  
y
RESUME is shown and playback continues from  
remaining tracks are played in sequence.  
where you have stopped.  
2 Playback starts in the chosen mode after 2 seconds.  
• To deactivate RESUME, switch the slider to OFF.  
RESUME goes off.  
y
• To return to normal playback, press MODE repeatedly  
until the display shows no active modes.  
HOLD – locking all buttons  
You can lock the buttons of the set by switching the slider to HOLD. Now, when a key  
is pressed, no action will be executed. This is of use, for example, when transporting  
the player in a bag. With HOLD activated, you can avoid accidental activation of other  
functions.  
1 Switch the slider to HOLD to activate HOLD.  
y All buttons are locked. HOLD is shown when you press any button. If the set is  
switched off, HOLD will be shown only when 2; is pressed.  
2 To deactivate HOLD, switch the slider to OFF.  
Note: If you deactivate HOLD by switching the slider to  
RESUME, you will be activating the RESUME  
function.  
 
16  
17  
FEATURES  
IN-CAR CONNECTION  
ESP  
In-car use (connections supplied or optionally available)  
Conventional portable CD-players subjected to a shock  
or vibration during playback often skip parts of the CD. The  
ELECTRONIC SKIP PROTECTION (ESP) feature, with which  
your set is equipped, however, prevents such loss of  
continuity when your player is subjected to light vibrations.  
But ESP does not prevent playback interruptions caused by  
vigorous exercise. Nor does it protect against damage  
resulting from the player being dropped!  
Only use the AY 3545 car  
voltage converter (4.5V, DC,  
positive pole to the centre pin)  
and the AY 3501 car cassette  
adapter. Any other product may  
damage the set.  
ESP  
4,5 V DC  
D
I
GIT  
AL  
D
I
GIT  
AL  
1 Put the CD-player on a  
horizontal, vibration-free and  
stable surface. Make sure it  
is in a safe place, where the  
• Press ESP during playback to activate the skip  
protection.  
player is neither a danger nor obstacle to either driver or passenger.  
y
ESP is shown and the protection is activated.  
2 Connect the DC plug of the voltage converter to the 4.5V DC socket of the CD-  
player (only for a 12 V car battery, negative grounding).  
• To deactivate the skip protection, press ESP again.  
ESP goes off and the protection is deactivated.  
y
3 Insert the voltage converter into the cigarette lighter socket. If necessary, clean the  
cigarette lighter socket to obtain a good electrical contact.  
4 Turn down the volume and connect the cassette adapter plug to the LINE OUT/p  
socket of the CD player.  
Pouch AY 3266 (supplied or optionally available)  
The pouch enables you to conveniently carry the  
CD-player so you can listen to music while exercising.  
5 Carefully insert the cassette adapter into the car radios cassette compartment.  
6 Make sure the cord does not hinder your driving.  
1 Make sure ESP is activated.  
7 Start the CD-player, set VOL E to position 8 and adjust the sound with the car  
radio controls.  
2 Fasten the pouch belt tightly around your waist.  
• Always remove the voltage converter from the cigarette lighter socket when the  
CD-player is not in use.  
3 Put the CD-player into the pouch with the keys facing  
away from your body, and close the flap.  
Note: – Avoid excessive heat from the car heating or from direct sunlight (e.g. in a  
parked car in the summer).  
Notes: – While exercising, take care that the CD-player is not hit by a limb or other  
object, such as a branch or post.  
– If your car radio has a LINE IN socket, it is better to use this instead of the  
cassette adapter. Simply connect a signal lead from the LINE OUT/p socket  
of the CD-player to this LINE IN socket.  
– Do not use the pouch if you are suffering from a skin irritation.  
– Do not machine-wash the pouch as it could lose shape or colour.  
 
18  
19  
TROUBLESHOOTING  
TROUBLESHOOTING  
If a fault occurs, first check the points listed, before taking the set for repair.  
WARNING  
If you are unable to solve a problem by following these hints, consult your dealer or  
service centre.  
Under no circumstances should you try to repair the set yourself as this  
will invalidate the guarantee.  
Problem  
No power,  
playback does  
not start  
Possible cause  
Solution  
Problem  
Possible cause  
Solution  
Batteries  
The CD skips tracks. The CD is damaged or dirty.  
Replace or clean the CD.  
Batteries inserted incorrectly  
Insert the batteries  
correctly.  
RESUME, SHUFFLE or PROGRAM is  
active.  
Switch RESUME, SHUFFLE  
or PROGRAM off.  
Batteries are empty.  
Contact pins are dirty.  
Mains adapter  
Change the batteries.  
Clean them with a cloth.  
No sound or  
bad sound quality  
PAUSE is activated.  
Loose, wrong or dirty  
connections  
Press 2;.  
Check and clean  
connections.  
Loose connection  
Connect the adapter  
securely.  
Volume is not adjusted.  
Malfunctions due to nearness  
of active mobile phones  
Strong magnetic fields near  
the player  
In-car use  
cassette adapter is  
inserted incorrectly.  
Temperature inside the car  
is too high/low.  
Cigarette lighter socket  
is dirty.  
Wrong playback direction of the Change the autoreverse  
Adjust the volume.  
Keep the player away from  
active mobile phones.  
Change the player’s position  
or connections.  
In-car use  
Cigarette lighter is not powered Switch on ignition or insert  
when ignition is off.  
CD-RW (CD-R) is not recorded  
properly.  
batteries.  
nF dISC  
Use FINALIZE on the  
CD recorder to complete  
the recording.  
indication  
Insert the cassette adapter  
correctly.  
Let the player adjust to the  
temperature.  
Clean the cigarette  
lighter socket.  
no dISC  
The CD is badly  
scratched or dirty.  
CD is not or incorrectly inserted. Insert a CD, label upwards.  
The laser lens is steamed up.  
Replace or clean the CD.  
indication  
Wait until the lens has  
cleared.  
Deactivate HOLD.  
Disconnect the set from  
power supply or take out  
the batteries for  
HOLD indication  
and/or no reaction  
to controls  
HOLD is activated.  
Electrostatic discharge  
car cassette player’s  
autoreverse feature  
direction.  
a few seconds.  
CAUTION  
Use of controls or adjustments or performance of procedures other  
than herein may result in hazardous radiation exposure or other  
unsafe operation.  
 
20  
21  

Pelco Digital Camera C2946M D User Manual
Pella Door 80JJ0103 User Manual
Philips Car Stereo System 21PT9457 User Manual
Philips Fryer HD6152 User Manual
Philips Network Card FMod TCP BOX User Manual
Philips Network Card SDJ6134W 17 User Manual
Pioneer Car Video System AVH P6650DVD User Manual
Planar Computer Monitor PT150M User Manual
Polycom Telephone IP300 User Manual
ProScan Tablet PLT7033D User Manual