Model 562 User Guide
NOISE-CANCELING DYNAMIC MICROPHONE
SPECIFICATIONS
Type
Noise-canceling Dynamic
Frequency Response
100 to 6,000 Hz (See Figure 1)
Impedance
150 Ohms, rated (180 Ohms, actual). Designed for con-
nection to inputs rated 19 to 300 Ohms.
Output Level (at 1,000 Hz)
Open Circuit Voltage ...................–64 dBV/Pa (0.6 mV)
........................................................(1 Pa = 94 dB SPL)
Polarity
Positive pressure on diaphragm produces positive volt-
The Shure Model 562 is a noise-canceling dynamic
microphone designed for voice applications in fixed-station
paging and radio communications. It provides highly intelli-
gible speech communication where high volume back-
ground noise is present. The 562 has a smooth response
and is ruggedly constructed to withstand a wide range of
humidities and temperatures. With its standard 5/8"–27
thread mount, the 561 attaches directly to boom or a goose-
neck with the cable concealed inside.
age on the white cable lead relative to the black lead.
Cable
1.2m (4 ft.), non-detachable, two-conductor shielded
Stand Thread
Suitable for mounting on stand or gooseneck with
5/8"–27 thread.
Case
Silver and black aluminum with stainless steel grille
Dimensions
The frequency response and noise-canceling character-
istics of the 562 make it ideal for language labs, paging
applications in noisy environments, and base-station com-
munications. It is also effective as a talkback or cuing micro-
phone in TV, film, and recording studios. The 562's low
impedance allows you to use long lengths of cable without
affecting level or response characteristics.
See Figure 2
67.1 mm
(2–21/32 in.)
34.5 mm DIA.
(1–3/8 in.)
Features
5/8 in.–27 thread
• Excellent response for voice reproduction
• Noise-canceling design
#4–40 Allen setscrew
• Low impedance
OVERALL DIMENSIONS
• Rugged construction
Figure 2
• Withstands wide range of temperatures and humidities
Net Weight
128 grams (4.5 oz.)
Packaged Weight
241 grams (8.5 oz.)
• Mounts on gooseneck and lockable with Allen setscrew
(Allen wrench supplied)
Certification
Conforms to European Union directives, eligible to bear
CE marking; meets European Union EMC Immunity Re-
quirements (EN 50082-1: 1992).
+10
0
-10
2
3
4
5 6 789
1000
2
3
4
5 6 789
10000 20000
20
50
100
Hz
TYPICAL FREQUENCY RESPONSE
Figure 1
©2005, Shure Incorporated
27C2053 (Rev. 7)
Printed in U.S.A.
|
Sharp Stereo Receiver SD HX600 User Manual
Shopsmith Indoor Furnishings 555970 User Manual
Sony Clock Radio ICF C180 User Manual
Sony Graphics Tablet C2305 User Manual
Sony Microcassette Recorder ICD SX User Manual
Sony VCR DSR 30P User Manual
Spirit Elliptical Trainer EL255 User Manual
Subaru Robin Power Products Welder EH64 User Manual
Sungale Tablet ID431WTA User Manual
Sylvania CRT Television RSDCT2703R User Manual