Sony Portable Multimedia Player NWZ W202 User Manual

About the Compatible  
Software  
Checking Supplied  
Accessories  
Parts and Controls  
What is ZAPPIN  
Playback?  
Neckband OPR (Operation) lamp  
This player (1)  
Stand with USB cable (1)  
Windows Media Player 11  
Windows Media Player can import audio data from CDs and transfer data to the player. When you use  
copyright protected WMA audio files, use this software.  
Since Windows Media Player 11 does not analyze the sound patterns of songs while transferring,  
ZAPPIN effectiveness will not be optimal because the most melodic or rhythmical song passages will  
not be recognized.  
Windows Media Player 11 is not included with the player.  
Transferable files: Music (MP3, WMA, LPCM)  
You can download Windows Media Player 11 from “My Computer” – “WALKMAN NWZ-W202” –  
“Storage Media” – “PC_Application_Software” – “WMP11_Download” after connecting the player to  
the computer by using the supplied stand. You can also download Windows Media Player 11 from the  
following website.  
For details on operation, refer to the Help of the software or visit the following website.  
ZAPPIN enables sequential playback of song clips at a preset duration.  
SHUFFLE switch  
Jog dial  
RESET button  
VOL+/- button  
Normal playback  
Status lamp  
USB jack  
Operation Guide  
NWZ-W202  
How to place the player on your ears  
Check the left (L) and right (R) parts of the player.  
Earbuds (Size S, L) (Supplied in  
pairs)  
Holder (1)  
Operation Guide (this manual) (1)  
Changes to ZAPPIN.  
Separate the left and right parts.  
©2009 Sony Corporation Printed in Malaysia  
To view the Operation Guide (PDF file)  
These parts are magnetically coupled.  
How to install the earbuds  
ZAPPIN playback  
Content Transfer  
At purchase, M size earbuds are installed (L and S sizes are also supplied). To enjoy better sound quality,  
change the size of the earbuds or adjust the earbud position to fit in your ears comfortably and snugly.  
When you change the earbuds, twist while installing them firmly on the player to prevent the earbud  
from detaching and remaining in your ear.  
Hang the neckband over the back of your neck and ears, and place the earbuds  
Content Transfer can transfer music from a computer to the player by a simple drag-and-drop operation.  
You can use Windows Explorer or iTunes to drag and drop data to Content Transfer.  
If you transfer songs using Content Transfer, the most melodic and rhythmical song passages will be  
recognized by the 12 TONE ANALYSIS function for use with ZAPPIN playback.  
However, the 12 TONE ANALYSIS takes time, so transfer will be slower. You can set the 12 TONE  
ANALYSIS to Automatic,Always ON” or “OFF” before transferring. To transfer songs more quickly,  
set to “OFF.”  
into your ears.  
This Operation Guide is supplied also by PDF file. The Operation Guide (PDF file) of  
the following languages is supplied in the players memory:  
English/French/German/Spanish/Italian/Russian/Chinese (Simplified)/Chinese  
(Traditional)/ Korean/Ukrainian/Arabic/Swedish/Finnish/Danish/Norwegian/  
Portuguese/Greek/Turkish/Dutch/Hungarian/Czech/Polish/Slovakian  
If an earbud becomes damaged, optional earbuds (EP-EX1) are available for purchase.  
Short recognizable clips of songs (such as the most melodic or rhythmical section)  
The ZAPPIN playback time for song clips can be set to either “Short” or “Long.”  
For details on operation, refer to the Help of the software.  
Transferable files: Music (MP3, WMA, AAC*1, WAV*2)  
Returns to normal playback and restarts playback of  
the current song from the beginning.  
1
2
Connect the player to the computer by using the supplied stand.  
1
*
*
DRM files are not compatible.  
This format file is not analyzed by the 12 TONE ANALYSIS while transferring. So, the most melodic  
and rhythmical section of the song will not be recognized.  
Select “start- My Computer- WALKMAN NWZ-W202- Storage Media-  
2
How to store the player into the holder  
“Operation Guide- XXX_NWZW202.pdf”*.  
To protect the player and prevent magnetic leakage, store the player in the supplied holder whenever  
*
Language name is displayed in the place of “XXX.” Choose the desired language for  
your manual.  
carrying or when not using the player.  
The magnet is on the left side. Do  
not place credit cards or ATM  
cards, etc. (magnetic coded cards)  
near the player when it is not  
stored in the holder to prevent  
damage to the magnetic coding  
on the cards.  
Normal playback  
Supplied software  
Content Transfer (1)  
This software is included with the player.  
See “3 Playing Music” for details on operations.  
To play back the most melodic and rhythmical song clips  
When you transfer songs using Content Transfer software with the 12 TONE ANALYSIS set to  
Automatic” or Always ON,” the information of the most recognizable sections based on melody and  
rhythm will be found and added to each song. Then, the most melodic and rhythmical clips from each  
song can be played back sequentially during ZAPPIN playback.  
Press the player into the  
holder until it clicks.  
4-129-781-11(1)  
Content Transfer is included with the player. For details on how to install Content Transfer, see  
“Installing Content Transfer” on the reverse side.  
1
Preparing the Player  
Charging the player  
Upon purchase, first, charge the player.  
2
Importing and  
3
Playing Music  
Transferring Music  
Normal playback  
ZAPPIN playback  
Turning on the player  
Turning off the player  
1
2
3
You can transfer songs to the player using Windows Media Player 11 on your  
computer.  
Connect the player to the supplied stand.  
Changing to  
ZAPPIN playback  
Playing songs  
The player plays back song clips for about 4 seconds each.  
Unite.  
Separate.  
Connect the USB cable of the stand to a running computer.  
Import songs from CDs, etc., to Windows Media Player 11 on the computer.  
If the most recognizable passage of the song cannot be found, the song is played back from  
the 45 second point from the beginning. If the length of the song is under 45 seconds, the  
song is played back from some point before the end of the song.  
When you use the player for the first time, or if you have not used the player for a long time,  
the player may take some minutes to start charging or to be recognized by the computer.  
If a screen appears presenting a choice of actions, click “Cancel.”  
Press and hold  
the jog dial  
during  
playback until  
“Zappin inis  
heard.  
For details on how to import songs from CDs, etc., refer to the Help of Windows Media  
Player 11. You do not need to re-import songs that have previously been imported to  
Windows Media Player 11.  
Press the jog dial to start  
playback.  
1 Click “Rip.”  
Skipping to the previous/next song, or shuffle playback during ZAPPIN  
playback  
You can move to the previous/next song, or play back songs in random order.  
The method of operation is the same as normal playback.  
to the USB connector  
Press the jog dial until it clicks.  
Status  
lamp  
Zappin in  
Skipping to the previous/next song  
Changing the playback time of song clips in ZAPPIN playback  
The playback time for song clips can be set to either “Long” or “Short.”  
2 Click here to  
start importing.  
When you press and hold the jog dial until the  
Zappin long  
Connect the player to the computer by using the stand.  
voice guidance of “Zappin longis heard, the  
Returning to  
Charging starts. The status lamp blinks slowly during charging. When charging is completed,  
the status lamp will stop blinking and light dimly while the player is connected to the  
Zappin short  
Rotate the jog dial all the way  
quickly to (backward) or  
(forward).  
playback time of song clips changes to about  
15 seconds (Long). When you press and hold the  
jog dial until “Zappin shortis heard during  
“Longplayback, the playback time of song clips  
returns to about 4 seconds (Short).  
normal playback  
Transfer songs from Windows Media Player 11 to the player.  
The status lamp blinks brightly while transferring songs to the player.  
computer. For details about charging time and the battery duration, see  
on the reverse side.  
“Specifications”  
Press the jog  
dial during  
ZAPPIN  
Shuffle playback  
Checking the remaining battery power  
Remaining battery power is indicated in the OPR lamp. When the OPR lamp  
Slide the SHUFFLE switch in the direction of the  
arrow to play back songs in random order.  
1 Choose albums,  
etc.  
playback.  
changes to red, recharge the battery.  
Press and hold the jog dial  
until either voice guidance is  
heard.  
To stop playback  
Green*  
Red* Quick red blinking  
When the battery is used up,  
the OPR lamp blinks red quickly  
and a long beep is heard. You  
cannot operate the player.  
Zappin out  
2 Click here to transfer  
To stop playback completely during ZAPPIN playback  
to the player.  
* Blinks at about 5 second intervals.  
Press the jog dial to return to normal playback, then press the jog dial again.  
Hints  
See also  
“Hints about transferring music” and “Notes about transferring music” on the  
Hints  
reverse side.  
After you press the jog dial, the OPR lamp blinks green and red  
alternately and the beep is heard repeatedly until the playback starts.  
Please wait until the OPR lamp blinking and the beep stop.  
Press the jog dial until it clicks.  
You can also transfer songs other than by using Windows Media Player 11. For details, see  
“Using Content Transfer” on the reverse side.  
See also  
“Hints about playing music” on the reverse side.  
 

Sharp PDAs Smartphones El 6850 User Manual
Sherwood Scuba Diving Equipment SRB3108 User Manual
Singer Sewing Machine 119 2 User Manual
SMSC Switch SCH5617 User Manual
Sony Cassette Player TC D5M User Manual
Sony Ericsson Cell Phone Z320 User Manual
Sony Portable Multimedia Player NSZ GT1 User Manual
StarTechcom Computer Monitor LCD2180UX User Manual
Sunwave Tech Universal Remote SRC 3820 User Manual
Swann Security Camera SW244 X6C User Manual