Ativa Paper Shredder DSC200C User Manual

DSC200C  
DXC160C  
DXC240C  
 
Limited Warranty-Product Two Year / Cutter Lifetime  
WHAT THIS WARRANTY COVERS: This limited warranty covers the original purchase of new prod-  
uct used for normal commercial, personal or household use. Office Depot, Inc. (ODP) warrants its  
products will be free from defects in materials and workmanship (normal wear and tear excepted),  
for two (2) year from the date of purchase, except as provided below. ODP shall further provide a  
lifetime warranty on the cutting cylinders of the product from the date of purchase, except as pro-  
vided below. ODP, at its option, will replace with a comparable product or with cutting cylinders  
(as applicable), free of charge, or provide a store credit for the approximate retail value of the  
item as determined by ODP, if the product or cutting cylinders fail under normal use as a result of  
such defect.  
WHAT THIS WARRANTY DOES NOT COVER: This warranty does not apply to damage caused  
by fire, accident, negligence, misuse, improper cleaning or other circumstances not directly attrib-  
utable to manufacturing defects.  
LIMITATION OF DAMAGES: ODP PROVIDES THIS LIMITED WARRANTY IN LIEU OF ALL OTHER WAR-  
RANTIES EITHER EXPRESS OR IMPLIED. EXPRESSLY EXCLUDED ARE ALL WARRANTIES OF FITNESS  
FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. ODP’S SOLE OBLIGATION AND THE USER’S  
EXCLUSIVE REMEDY UNDER THIS WARRANTY SHALL BE LIMITED TO THE REPLACEMENT AT ODP’S  
SOLE DISCRETION AND COST, OF PRODUCT OR COMPONENTS.  
IN NO EVENT SHALL ODP, ITS AFFILIATES, SUBSIDIARIES OR PARENT COMPANIES BE RESPONSIBLE  
FOR CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES ARISING OUT OF A CLAIM OF DEFEC-  
TIVE PRODUCT EVEN IF ODP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
SOME STATES OR PROVINCES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMI-  
TATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF  
INCIDENTIAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS MAY NOT APPLY TO  
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER  
RIGHTS WHICH MAY VARY BY STATE OR PROVINCE.  
THIS WARRANTY APPLIES ONLY TO THE U.S. AND CANADA.  
Return Instructions  
Please call 1-866-707-9502 for product support and warranty claims.  
3
 
Identity Theft Protection Tips for Consumers  
How can you prevent becoming a victim of identity theft? While no one can totally prevent this crime  
from occurring, here are some positive steps to take which will decrease your risk.  
1. Carefully destroy papers you throw out. Be especially careful with those containing  
sensitive or identifying information. Use your shredder for destroying documents.  
2. Check your credit reports at least once a year.  
3. Always guard your Social Security Number (SSN). Don't carry your Social Security Card  
with you.  
4. Do not put your SSN or driver's license number on your personal checks.  
5. Guard all of your personal information. Never give your SSN to anyone unless they  
have a good reason for needing it.  
6. Watch out for people who may try to eavesdrop to overhear the information you  
give out verbally.  
7. Never provide information to telephone solicitors unless you have initiated the call.  
8. Immediately delete (and don't reply to) any suspicious email requests, especially if they  
are asking for passwords or other unique, identifying information.  
9. Use a P.O. Box or locked mailbox for all mail correspondence.  
10. Reduce the number of preapproved credit card offers you receive by calling  
1-888-5OPT OUT (they will ask for your SSN).  
11. Request a credit freeze if you live in a state that allows this option.  
Illustration is for reference only.  
4
 
How to Use Your Shredder  
Setup - Tilt / pullout basket models  
Install casters on bottom of unit (if applicable). Mount the shredder head securely on the  
rim of the cabinet. Insert the inclined receptacle into the cabinet. The elevation on the  
front side underneath the receptacle must be fixed exactly inside the corresponding cavity on  
the bottom of cabinet. Close the receptacle by simply pushing it toward the cabinet. Connect  
the power cord to any standard 120 volt AC outlet.  
Note: Some shredders include a built-in safety mechanism that requires the shredder to be cor-  
rectly mounted on the supplied wastebasket and the pullout basket to be completely closed.  
Lining the wastebasket with a plastic bag will interfere and may keep the shredder from func-  
tioning properly.  
Caution: All shredders have very sharp, exposed blades on the underside. Please use care when  
mounting the shredder on to the cabinet.  
If your shredder came with casters, they may need to be installed by inserting the pegs into the  
four holes on the bottom of the cabinet.  
SPECIFICATIONS:  
Shredding Capacity  
Shred Type  
Shred Size  
Throat Width  
6 mm  
0.24 in  
240 mm  
9.45 in  
20 Sheet  
Stripcut  
DSC200C  
DXC160C  
DXC240C  
Feed Opening  
4 mm x 30 mm  
0.16 in x 1.18 in  
240 mm  
9.45 in  
16 Sheet  
24 Sheet  
Crosscut  
Crosscut  
4 mm x 40 mm  
0.16 in x 1.57 in  
240 mm  
9.45 in  
LCD Screen  
Pullout Basket  
Illustration is for reference only.  
5
 
How to Maintain your Shredder  
Use Shredder Lubricant Regularly  
• Only use lubricants specifically designed for your shredder, such as shredder lubricant,  
shredder lubricant sheets or shredder lubrication pouches.  
• NEVER use spray lubricants.  
• Follow directions on the shredder lubricant, shredder lubricant sheets or shredder  
lubrication pouches.  
• Do not touch the cutting surface.  
• Continue to recycle waste paper in a normal manner.  
When Using Shredder Lubricant Sheets or Pouch  
Never tear or open a shredder lubricant sheet. Please, empty waste basket prior to use. Shred one  
shredder lubricant sheet by feeding sheet in the direction on the arrows, directly into the paper  
feed entrance as per the instructions that came with your shredder. After shredding the lubricant  
sheet run the shredder in reverse for 10 seconds for optimal performance. Align the first lubricant  
sheet to the left of the shredder throat. The next time you use a shredder lubricant sheet align the  
pouch to the right of the shredder throat. Continue to alternate between aligning the pouches to  
the left and right to ensure the entire cutting mechanism remains well lubricated. Re-lubricate  
your shredder by shredding a lubrication sheet after 30 minutes of shredding, or, a minimum of  
twice per month to maintain maximum performance.  
When Using Bottled Shredder Lubricant  
Apply shredder lubricant directly into the paper feed entrance (Figure 2) and shred paper or  
apply a stripe of lubricant across a sheet of paper (Figure 3), then shred the paper as per the  
instructions that came with your shredder. After applying lubricant and shredding paper, run  
the shredder in reverse for 10 seconds for optimal performance. Reapply lubricant after 30 min-  
utes of shredding or a minimum of twice per month to maintain maximum performance. Store  
in a cool dry place. Recycle empty bottle whenever possible or dispose of it in normal trash.  
Figure 1  
Figure 2  
Figure 3  
Illustration is for reference only.  
6
 
How to Maintain your Shredder  
Clearing a Jam  
If paper is not inserted properly into the shredder, or if the sheet capacity is exceeded, a jam may  
result. The shredder will automatically stop until the jam is cleared. Move the switch to the REVERSE  
(REV) position, and remove the excess paper from the top and pull it out.  
TO PREVENT ANY INJURIES, DO NOT PLACE YOUR HANDS NEAR THE FEED OPENING.  
Once the paper is cleared, normal shredding operation can resume. If the shredder jams while in  
reverse, press the switch to the FWD position and let shredder run to clear the jammed paper. If jam  
does not clear, slide the switch back and forth between the REV and FWD until the jam is cleared. If  
the jam cannot be cleared following this procedure, unplug the unit and carefully remove the  
jammed paper manually.  
Overheating  
If your shredder overheats, the unit will automatically shut off and all functions will cease in order  
to protect the motor. Turn off and unplug the shredder from the outlet. Allow enough time for  
the motor to cool down. The shredder will not resume normal function until the temperature of  
the motor cools down to a safe temperature. Then plug the shredder back into the outlet, turn  
the unit back on and resume normal operation.  
Make sure to empty waste basket to avoid overloading the basket and damaging the cutting mechanism.  
Staples and Paperclips  
Shredders are designed primarily to shred paper and single credit cards or CDs (as indicated).  
Although our shredders are safe to shred the occasional standard staple, you should remove them if  
possible. Also, industrial or non-standard, large size staples must be removed. Paperclips should not be  
shredded at any time, as they significantly reduce the life of the shredder. Please remove staples and  
paperclips from paper before shredding.  
7
 
Warnings  
CAUTION: KEEP THIS DEVICE AWAY FROM CHILDREN AND PETS! Place the paper shredder in an  
area less accessible to children.  
DO NOT PLACE FINGERS TOO CLOSE TO THE FEED SLOT AS SERIOUS INJURY MAY OCCUR.  
Paper shredders can pull children's fingers into the shredder mechanism.  
AVOID GETTING JEWELRY, HAIR OR LOOSE CLOTHING NEAR THE FEED SLOT. If wearing a tie or  
long necklace, use caution to keep items away from the shredder opening.  
Connect the cord to any standard 120 volt AC outlet.  
RISK OF FIRE. NEVER dispose of flammable chemicals or materials that have come into contact  
with flammable chemicals (for example, nail polish, acetone, gasoline) in the shredder basket.  
ALWAYS turn the shredder off and unplug the power cord from the AC outlet before cleaning  
it, moving it, or emptying the wastebasket.  
NEVER place the shredder near water or any heat source.  
ALWAYS keep wastebasket emptied so that the shredder's output is not impeded.  
NEVER use any petroleum based or flammable oils or lubricants in or around the machine as some  
oils can combust causing serious injury. Lubricants specifically designed for shredders are acceptable.  
NEVER spray any aerosol-based products in or around the shredder.  
NEVER shred envelopes, labels or anything with glue or any sticky substance as this will lead to  
paper jams.  
AVOID shredding paperclips.  
DO NOT use the shredder if the power cord is damaged in any way.  
DO NOT attempt to service this product yourself as doing so may expose you to sharp cutting  
blades and/or electricity and will void the manufacturer’s warranty.  
NEVER let the wastebasket get full. This will lead to shredded material being pulled back up  
into the shredder and cause jams.  
8
 
9
 

Acnodes Car Video System RM 6193 User Manual
AEG Oven E4130 1 User Manual
Aiphone Home Security System MYW BA User Manual
Aiwa Portable Speaker SX AVR30 User Manual
Alcatel Lucent Switch OS9000 User Manual
Amcor Air Conditioner PORTABLE AIRCONDITIONER User Manual
Audiovox Automobile Alarm AA 930 User Manual
Avenview TV Cables FO HDM 1000M EMI User Manual
BC Speakers Speaker 18 PS 46 User Manual
Viking Beverage Dispenser DUWC44 User Manual