BC Speakers Portable Speaker DE200 User Manual

Specifications  
Throat Diameter (1)  
Nominal Impedance (2)  
Minimum Impedance  
Nominal Power Handling (3)  
Continuous Power Handling (4)  
Sensitivity (1W/1m) (5)  
Frequency Range  
Recommended Crossover (6)  
Voice Coil Diameter  
Winding Material  
25 mm (1 in)  
8 ohm  
7.5 ohm  
50 W  
100 W  
106 dB  
1 -18 kHz  
1.6 kHz  
44 mm (1.7 in)  
Aluminium  
0.11 mH  
Titanium  
1.5 T  
Inductance  
Diaphragm Material  
Flux Density  
Mounting and Shipping Info  
Two M5 holes 180° on 76 mm (3  
in) diameter  
Three M6 holes 120° on 57 mm  
(2.2 in) diameter  
Overall Diameter  
Depth  
Net Weight (1 unit)  
Shipping Weight (8 units)  
Shipping Box (8 units)  
102 mm (4.0 in)  
61 mm (2.4 in)  
1.7 kg (3.7 lb)  
14.6 kg (32.1 lb)  
230x230x160 mm  
(9x9x6.3 in)  
1
Driver mounted on B&C ME45 horn  
2
Also available in 16 ohms, data upon request  
3
2 hours test made with continuous pink noise signal (6 dB crest factor)  
within the specified range . Power calculated on rated minimum  
impedance.  
HF Drivers  
100 W continuous program power capacity  
1” horn throat diameter  
DE200  
4
Power on Continuous Program is defined as 3 dB greater than the  
Nominal rating.  
5
6
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.  
12 dB/oct. or higher slope high-pass filter.  
44 mm (1.7 in) aluminium voice coil  
Titanium diaphragm  
1000 – 18000 Hz response  
106 dB sensitivity  
 

Acoustic Research Home Theater System AWS63 User Manual
ADC IP Phone VoIP Telephone User Manual
ADC Network Card GigE Series User Manual
AEG Cooktop HK854220FB User Manual
AKG Acoustics Headphones K 430 User Manual
Alcatel Lucent Network Card MVNE User Manual
Amana Refrigerator A8RXNGMW User Manual
AMX Network Router MVP TCS 52 User Manual
Barco Projection Television PGWU 61B User Manual
Behringer Stereo Equalizer DEQ1024 User Manual