BC Speakers Portable Speaker DE950TN User Manual

Specifications  
Throat Diameter (1)  
Nominal Impedance (2)  
Minimum Impedance  
Nominal Power Handling (3)  
Continuous Power Handling (4)  
Sensitivity (1W/1m) (5)  
Frequency Range  
Recommended Crossover (6)  
Voice Coil Diameter  
Winding Material  
50 mm (2 in)  
8 ohm  
8.3 ohm  
110 W  
220 W  
108.5 dB  
0.5 -18 kHz  
0.8 kHz  
75 mm (3 in)  
Aluminium  
0.14 mH  
Titanium  
2.05 T  
Inductance  
Diaphragm Material  
Flux Density  
Mounting and Shipping Info  
Four M6 holes 90° on 102 mm  
(4 in) diameter  
Overall Diameter  
Depth  
131 mm (5.2 in)  
85 mm (3.3 in)  
Net Weight (1 unit)  
Shipping Weight (4 units)  
Shipping Box (4 units)  
2.7 kg (5.9 lb)  
11.4 kg (25.1 lb)  
300x160x210 mm  
(11.8x6.3x8.3 in)  
1
Driver mounted on B&C ME75 horn  
2
Also available in 16 ohms, data upon request  
3
2 hours test made with continuous pink noise signal (6 dB crest factor)  
within the specified range . Power calculated on rated minimum  
impedance.  
4
HF Drivers  
220 W continuous program power capacity  
2” horn throat diameter  
Power on Continuous Program is defined as 3 dB greater than the  
Nominal rating.  
DE950TN  
5
6
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.  
12 dB/oct. or higher slope high-pass filter.  
75 mm (3 in) aluminium voice coil  
Titanium diaphragm  
500 – 18000 Hz response  
108.5 dB sensitivity  
Neodymium magnet assembly with shorting copper cap  
 

ABC Office Paper Shredder 1033 User Manual
Airfree Air Cleaner Onix 3000 User Manual
Aiwa CD Player XH A1000 User Manual
Alliance Laundry Systems Washer SW039 User Manual
Aluratek Digital Photo Frame ADMPF108F User Manual
American Acoustic Development Speaker THE CUB User Manual
American Standard Hot Tub 9360018 User Manual
American Standard Sander 70145A 11 00 User Manual
Asus Computer Accessories AP100 User Manual
Audiovox Car Stereo System ACD 84 User Manual