GenTran Portable Generator 6370C User Manual

Mounting Instructions for Model 6370C Parallel Power Kit  
For Honda E3000i Generators Only  
Thank you for purchasing this Parallel Power Kit. Do not return this product  
to the store! If any parts are missing or damaged, please contact us toll free  
intended for use with two Honda EU3000i generators ONLY. Do NOT attempt  
to parallel two unlike generators! For 125 Volt Use Only.  
TOOLS NEEDED FOR ASSEMBLY:  
10 mm socket wrench or nut driver  
11/32 nut driver  
HARDWARE INCLUDED:  
(2) 8/32 Nylok nuts  
(2) M6-35 Standoffs  
Configuration of receptacle  
50 amps, 125 V  
(L6377)  
1
2
STEP 2  
STEP 1  
Mount Parallel Power Kit mounting plate on two bottom  
NEVER connect Parallel Power Kit while generator is  
running! Using the 10 mm socket wrench, remove the four  
(4) cap nuts on the end of the generator, and set aside.  
studs, and reattach bottom two cap nuts loosely.  
3
4
STEP 4  
Attach support bar with recesses over the standoffs.  
Reattach the remaining two cap nuts over the standoffs,  
and hand tighten. Then attach two Nylok nuts onto the  
studs protruding from the mounting plate to secure the  
support bar. Tighten all nuts moderately using a tool.  
STEP 3  
Insert two standoffs into the two upper holes, and  
hand tighten.  
 

Edimax Technology Switch ES 5224RM+ User Manual
Electro Voice Microphone C090 User Manual
Escient Camera Accessories M51001 01A1 User Manual
FEIN Power Tools Cordless Sander FMM250 User Manual
Frigidaire Washer 134489700A 0501 User Manual
Fujitsu Power Supply FLASH CAN 100 User Manual
GE Computer Monitor 68K System User Manual
GE Network Router 27959 User Manual
GE Oven JKP17 User Manual
Glen Dimplex Home Appliances Ltd Cooktop FSG 60 DO DOP User Manual