Haier TV Receiver 21FA10 AM User Manual

COLOUR TV RECEIVER

OWNER'S MANUAL

The Owner's Manual for the Follow Model:

21FA10-AM

Please read this manual carefully

before operating the unit, and keep

it for future reference.

Warning and Cautions

4. To prevent the TV set from firing

and electric shock, don't expose the

TV set to rain or moisture.

1. When you clean the TV set, please

pull out the power plug from AC outlet.

Don't clean the cabinet and the

screen with benzene, petrol and other

chemicals.

2. In order to prolong the using life of

the TV set, please place it on a

ventilated place.

5. Don't open the back cover,

otherwise it is possible to damage the

components in the TV set and harm

you.

6. When the TV set isn't going to be

used for long time or it is in thunder

and lightening, please pull out the

plug from AC outlet and the antenna

plug from the cover of the TV set.

3. Don't place the

TV set in the

sunshine or near

heat source.

Explanation on the display tube

In general, it is not needed to clean the tube surface. However, necessary,

it's surface can be cleaned with a dry cotton cloth after cutting off the power.

Don't use any cleanser. If using hard cloth, the tube surface will be damaged.

Installation

Antenna connection

Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV

system or an outdoor antenna .In different places, the suitable antenna type and position

are different.

300 twin-lead cable

Antenna adapter

75 coaxial cable

Mixer

additional

purchase

Antenna input

75 standard

coaxial type

Plug

(additional purchase)

AC power socket

Note

* It is recommended that you'd better use 75 coaxial cable to remove the

disturbance caused by airwave.

* Don't bind antenna cable and electric wire together.

Preparation for the remote control

Tips for remote operation

Battery installation

Remove the batteries cover.

!The battery life should be about one year

undernormaluse.

Insert two size AA batteries matching

the +/-polarities of the battery to the +/-

marks inside the battery compartment.

! When the remote control will not be used

for a long period of time or when the

batteries are worn out, remove the batteries

topreventleakage.

Do not throw the batteries into a fire.

Dispose of used batteries in the specified

manner.

! Do not drop, dampen or disassemble the

remotecontrol.

Position of Keys and Plug-ins

Front and side panel

Power indicator

Signal receiver

Power switch

TV/AV switch

Volume down/up

Channel down/up

Back panel

VIDEO2

VIDEO

AUDIO

Video Y input terminal

Video Cb input terminal

Antenna input socket

Video Cr input terminal

Audio right channelinput terminal

Audio left channelinput terminal

Video input terminal

Audio left channeloutput terminal

Audio right channeloutput terminal

Video output terminal

S-VIDEO input terminal

Using the Remote Control

Buttons and Descriptions

TV and AV Exchange Button

Toexchanger between TVand

other available videoinputs

TV/AV

DISP

SYSTEM

SCAN

LOCK

Mute Button

Press to conceal the sound of programs.

Screen Display Button

System Adjust Button

Direct-digit Choosing Button

Directly select channel numbers

Digit Select Button

Change the channel position number

between one digit, two-digits and three

-digits.

CALENDAR

S.STD

Picture Mode SelectButton

There are DYNAMIC, STANDARD,

MILD,MEMORY, PICTURE MUTEand

COLOR MUTE sixmodes of picture.

P.STD

Menu Select/Adjust Button

Use this buttonto adjust themenu,

the volume andthe channels, aswell

as to controlthe game.

CH+

CH-

VOL+

VOL-

Program Play-forward Button

Favorite program button

Game Background SelectButton

FM on /off button

BACK

PRE

Game Exit Button

FAVORITE SHUTTLE

No available

QSET

Start/Restart Game Button

Change the aspectratio

Saving mode on/off button

Shuttle button

ZOOM

TDX

MODE

EXIT

GAME

Program Play-backward Button

Sound Mode Select Button

Calendar

Program Scan Button

Lock Setting button

DC Standby Button

Sleep TimerButton

Power On and Power Off

Below are methods on how to power on/off the TV set with the switch on the TV and

on the remote control.

Power on/off

Connect/disconnect to the power

1. Connect the power supply wire, then press

power switch button, the red power indicator will

light, in several seconds the picture will appear

on the screen.

Power indicator

Signal receiver

2. If the TV is in the state of standby, press the

button on the remote control.

Power switch

TV/AV switch

NOTE

1. You can also press the 0-9

button to call off the standby

status instead of pressing the

Volume down/up

Channel down/up

DC Standby button. Press the

digit button of the preset channel

(limited to one digit) , you can

complete the selection of channel while you turn on the

TV set( To operate the preset of TV channel, please see

TUNING on page 11-14).

2. When you do not use the remote control, you can

directly press the CH+/- button on the television to

call off the standby status.

3. Press the button on the remote control

to get into the standby status.

DC Standby Button

4. Press the button on the TV set to

completely turn off the TV.

Direct-digit Choosing Button

Viewing TV Programs

The channels amountto 218 .

Viewing TV programs

How to select the TV program

1. Use the direct-digit choosing button

Press the button from 0-9 to select a one digit channel.

If you want to select a two-digits channel, press the

Digit Select button and change it into two-digits mode,

then press the number of the channel.

If you want to select a three-digits channel, press the

Digit Select button and change it into three-digits mode,

then press the number of the channel.

If the channel position number you select is larger than 218,

the TV will use the first two number as the channel position.

2. Use CH+/- button

Direct-digit Choosing

button

Press CH+ to increase the channel position number.

Press CH- to decrease the channel position number.

3. Use PRE button and BACK button

Press PRE button, you can go back to the channels you

viewed (as many as four).

Digit Select

button

Then, press BACK button, you can return to the channels you

were watching just now (as many as four) .

PRE

BACK

For example, if you have viewed channel 1,2,3,4,5,6 after the

TV is powered on, and the channel you are watching now is

number 7, then press PRE button, you can view channel 6,5,

4,3, and you may press the Back button to return to channel 7.

Choose the proper volume you like

Press VOL+/- button to adjust the volume.

VOLUME

SYSTEM

If the color of one channel is abnormal

It might be because the color has been

set improperly.You may follow the

instruction below toadjust it. Press

SYSTEM button, and you can see

the form.

COLOR AUTO

SOUND BG

SELECT ADJUST

CH+

If the color of the picture is abnormal

Press CH+/- button, and move the indicator to COLOR,

and press VOL+/- button to select the proper color(AUTO,

NTSC3.58,NTSC4.43 and PAL will appear alternately).

Generally, please set to AUTO.

VOL-

VOL+

CH-

If the sound is abnormal

Press CH+/- button, and move the indicator to SOUND,

and press VOL+/- button to select the proper sound.

Viewing TV Programs(continued)

Program scanning function is to let the television automatically scan all

preconcerted channel program(abouttwo seconds perchannel).

Program scan and screen display

Program scanning function

1. If you want to scan the programs

and select your favorite channel ,

just press the SCAN button, then

the television will start scanning

SCAN

from the present channel with a

rate of two seconds per channel

and until all the preconcerted

programs have been displayed

once, the TV set will return to the

starting channel.

2. If you want to terminate this

function during the scanning, press

the SCAN button again, and the

program will stay at the present channel.

Screen display

Usually, when you press the DISP button, the channel

DISP

number will appear on the top right corner of the screen

and press it again, the channel number will disappear

or disappear automaticallyin about 5seconds.

Viewing TV Programs(continued)

Saving mode.favorite program and shuttle

Saving mode

1. Using the QSET button

Press the QSET button to switch the saving mode

CH+

on/off. And the screen will display on/off at the

same time.

Press the QSET button more than 3 seconds to

call the ENERGY SAVE menu .

VOL-

VOL+

CH-

2.Press VOL+/- button and CH+/-

button to set the options of

AMBI-LUM/ AMBI-SND, after

this, select the ADJUST option

ENERGY SAVE

AMBI-LUM BRI.

AMBI-SND NOISE

ADJUST

SELECT ADJUST

and press VOL+/- button to

display OK, the set is finished.

QSET

Note: 1. After adjusting the item in the ENERGY

SAVE, the energy save function is on

automatically.

2. If the energy save mode is on, the buttons

P.STD and S.STD will not work. The screen

displays ENERGY SAVE ON.

FAVORITE

Favorite program setting

Press FAVORITE button for long time to enter the menu

as right figure. Press CH+/- button to select

FAV.POS

the favorite programand VOL+/- button to

adjust the channel. You could set 8favorite

programs.

After thesetting, press FAVORITE button

to select yourfavorite channel youhave

set .

SHUTTLE

Shuttle

Press SHUTTLE for long timeto set the program youare

watching as the shuttle channel.

If you want to back to this channel from the current

channel, press SHUTTLEbutton once .

Press FM to enter and press again to exit

Press CH+/- button to tune automatically

Press VOL+/- button to tune manually, press VOL+/- button

to adjust the volume if there is no FM on screen.

Press FM to enter.

FM 106.3MHZ

2 Press CH+/- button to start to

tune automatically.

SEARCHING

FM 106.3MHZ

CH+

VOL-

VOL+

CH-

3 After searching the program

the screen displays as right

figure, you could press 0 button

according the menu and