Series 65/XP95
• Detector base for flush mounting in
false ceilings
fig. C
fig. A
• Conduit box for surface mounting
• Detector base backplate
fig. D
• Code cards for selection of the
fig. B
detector address
• Detector mounting bracket
fig. E
fig. F
Detector base for flush mounting (ADM technology)
The detector base in flush mounting design (fig. A) ac- The detector address is selected by means of a code
commodates automatic fire detectors Series XP95 and card in the detector base. Therefore the detector can
Discovery for use in ADM loops with Apollo/Discovery be changed without additional tools. The package con-
protocol. It is specially designed for mounting in false tents includes a cover plate.
ceilings made of mineral fibre.
Specifications
Dimensions ø × H
Colour
150 × 15 (mm)
white
Weight
70g
Order number
Order name
246034
Detector Base/Anal./XP95/Disc/Apo 45681-250
Detector base for flush mounting (conventional technology)
The detector base in flush mounting design (fig. B) ac- Individual detector addressing can be achieved by
commodates automatic fire detectors in addressable connecting the optional Address Module NG60-1. The
conventional technology. It is specially designed for package contents includes a cover plate.
mounting in false ceilings made of mineral fibre.
Specifications
Dimensions ø × H
Colour
150 × 15 (mm)
white
Weight
70g
Order number
Order name
246035
Detector Base/Conv./60/65/Apo 45681-251
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
MS-ZBH-Ap_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
Detector mounting bracket
The Detector Mounting Bracket MMW1-1 (fig. F) is made floors, elevator shafts or shelves. The bracket provides
of galvanised steel sheet and serves for the lateral all threaded holes needed for easy mounting of a de-
mounting of an automatic fire detector, e.g., in false tector base.
Specifications
Dimensions L × W × H
Weight
130 × 120 × 40 (mm)
225g
Order number
Order name
249044
Detector Mounting Bracket MMW1-1
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
MS-ZBH-Ap_DBL_LST_EN_0804.PDF • PAGE 3
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
|