E X E C U T I V E
V e l o c i t y I I 1 8 ” F l o o r F a n
complies with
INTERNATIONAL
Model:
IEC60355
1 7 0 W
3 5 9 5 0
SAFETY SPECIFICATIONS
PLEASE READ ALL INSTRUCTIONS BEFORE USE
2 y e a r g u a r a n t e e
This sleek and modern high velocity fan provides
for a more powerful wind than ordinary plastic
fans. It draws air and circulates it through the
entire room, keeping the room cool and breezy.
If you put it near the windows, it will help exhaust
the hot/stuffy indoor air, and pulls in the fresh
outdoor air.
CLEANING AND MAINTENANCE
1. Disconnect the power cord from the mains.
Remove the guard and the blades carefully.
2. Use a cloth with a light soap to clean the oil
stains. Then, wipe dry and polish with a dry
cloth.
3. Never use polish or any corrosive liquid that
may damage the paint, metal, or plastic.
4. Re-assemble the blades and lock the guard
securely before use.
•
High velocity motor for maximum air circulation
Tilt-adjustment for flexible use
Triple speed selection
•
•
•
Precision fan blades for powerful wind but low-
noise
MOUNTING
To mount the appliance on the wall, use strong
and durable tools. Ensure that the correct support
is used to firmly support the weight of the fan.
•
•
Chrome stand, solid construction with
thermal-protection to prevent the motor from
overheating
Versatile use. It can be used on the floor, desk,
or mounted on the wall.
Note: Please note that this fan is only intended
for the use as set out in the above instruction
manual. Should this be used for any other
purpose, it is not carried by the suppliers
guarantee.
OPERATING INSTRUCTIONS:
1. Ensure the voltage used on the mains
corresponds with the voltage indicated on the
rating label.
2. Turn the speed control to selected speeds:
0(off) and speeds 1 (slow), 2 (medium), 3
(fast).
3. To change the tilting angle, push the tilt guard
to the angled desired.
4. Never touch the blades with your hand, or with
any other object, while the fan is plugged into
the wall socket.
5. Do not pull on the cord to remove the plug
from the wall socket, as this may cause
damage. If the cord or any other part of the
appliance is damaged, contact the supplier to
take it to the nearest authorized repair agent.
Do not carry out repairs with any unauthorized
electrician, as this will void the guarantee
provided for by the supplier.
27 Nourse
Avenue Epping
2
Cape Town
P.O. Box 975 Eppindust 7475 South Africa
Tel: +27 21 534 8114 Fax: +27 21 534 8086
Service Centre Share Call: 086 111 5006
w e b : w w w. c r e a t i v e h o u s e w a r e s . c o . z a
|